Daylight Harvest Sensor

These multi-function Microwave sensors primary function is to save energy by taking natural light into account and only adding as much additive light as required to attain a set point lux level. Parameters can be set using a 16- channel rotating wheel. Additional functionality is achieved using the optional remote-control programming tool.


    • Microwave Detection Technology

    • Target Light Level/Set Point

    • Standby dimmed level

    • Standby time before off

    • Optional Remote-Control Programmer


    • Suitable for use in wet or dusty environments

    • Very sensitive to movement of people and objects such as fork lifts so ensures lighting will be triggered on when required

    • The unit can be set to a range of target set point light levels

    • It also provides a safety lighting level

    • This is the time the standby light level is on. At the end of this time, the sensor instructs the light fittings to switch off

    • As well as a range of extended settings this provides single button programming of sensors from ground level without the need to physically access the sensor

Application Areas: • Farm buildings • Storage areas • Racking areas • Warehouses • Show rooms • Large garages • Aircraft hangers • Bus and coach depots


Case Studies