Kingston LED Low Bay

This superb fitting ticks all the boxes having great aesthetics, two wattages with either 1-10v driver for daylight harvest energy saving or integral sensor with 3 step dimming (corridor function) options. This functionality together with efficacies of over 120lm/cctW lowers the energy consumption of the installation, making a huge contribution to reducing the carbon footprint of the building.


    • Two power options available utilising PHILIPS 5,000K high quality IES LM80 tested SMD LED’s and IES TM21 extrapolation
    • Available with:
      • 1-10VDC driver as standard OR for 120W version
      • 1-10VDC driver + Integral 800W LED rated microwave sensor with 3-step dimming (corridor function) providing:
        • Lux switching point (how dark before switching on)
        • Sensitivity (adjustable detection zone)
        • Hold time delay (time after no detection to go to standby)
        • Standby light output % and time delay before off
    • Emergency versions available via conversions department
    • Quality construction materials
    • Tested to IK08
    • Dual row LED design
    • Standard clear lens provides 1100 beam angle with optional lenses for 900 or 600 light distribution
    • Option of 1100 opal lens
    • Grommeted access cover to termination area with large terminals
    • Space available for additional terminals
    • Surface and suspension mounting kits included
    • Wide ambient operating temperature range


    • Comparable output to T8 or T16 with energy savings of ≈ 40% • Has high efficacies of >120llm/cctW, long Rated LED Life, low lumen depreciation and low colour temperature shift for a consistent lighting solution over its extended lifetime
    • Can be used with Robus externally mounted sensors for presence detection and daylight harvesting, or for retrofit where analogue sensors are already installed
    • No external wiring other than mains supply required to provide a simple, cost effective functional solution for energy saving when the area is vacated
    • With a couple of terminals added in the termination area, additional non-sensor fittings can be switched by the sensor fitting up to the sensor max load capacity
    • Complete rows of fittings can be switched using the sensors “SYNC” function
    • Integral emergency reduces install cost associated with dedicated emergency fittings
    • Modern design provides great aesthetics
    • Robust with a feel of quality for long life
    • Reduces point source of light for greater eye comfort
    • Provides efficient light distribution and uniformity
    • Provides wide beam coverage at lower mounting heights with options for higher mounting and narrow beam distribution
    • Anti-glare option
    • Allows easy termination for 1.5mm2 loop in/out conductors
    • Sheathing is protected from chaffing
    • Provision to loop sensor switched live and control conductors
    • Allows dual mounting solutions suitable for most installations
    • Ideal for areas with no heating or cooling where extremes of temperature may be experienced during summer/winter times

Application areas: 

  • Low/medium height rack storage
  • Factory manufacturing and assembly
  • Industrial units
  • Shopping arcades/centres
  • Bus, coach and car repair garages
  • Workshops
  • Exhibition halls
  • Gymnasiums


Case Studies