Lazer LED Vapour proof

The Lazer is a high quality, high light output, LED fitting designed to replace traditional T5 and T8 corrosion-proofs whilst making substantial energy and maintenance cost savings. It utilises a unique fast fix wire-through arrangement to dramatically reduce installation time and poor connections often associated with conditions during on-site installations of this type.

Features+

• Complete range
• Factory fitted fast-fix spring terminal connector glands both ends with all internal wiring within the fitting complete:
  • Pre-wired incoming gland to driver
  • Pre-wired loop out from driver to outgoing gland
• Gland spring terminals accept 1.5mm2 conductors
• Accessory pack included comprising:
  • Stainless steel surface mounting brackets
  • Stainless steel suspension hangers
  • Diffuser clip securing screws
  • Spare rubber gland plug
• Opal polycarbonate Pro-diffuser and body
• Dedicated fitting with LED gear tray utilising high quality LM80 tested SMD’s
• Solid state technology and optimised driver design
• IP65

Benefits+

• Direct replacements for 1.2m and 1.5m single and twin T5 and T8
• Reduces the possibility of poor or incorrect internal connections
• Ready to wire into glands with incoming supply and outgoing cable to next fitting
• Terminals are suitable for most lighting circuit cable CSA conductors
• Spring terminals guarantee permanent conductor connection without hotspots or high resistance due to lose connections
• Reduces installation time and costs because:
  • There is no requirement to remove diffuser or gear tray to gain access for driver connection
  • No drilling of gland points and fitting glands needed
• These provide:
  • Fitting simply clicks into the brackets for optional surface or suspension mounting methods depending on installation requirement such as mounting material and height
  • Security of the fitting – more difficult to open
  • Spare if gland plug is lost or electrical layout changes
• Provides a strong and durable fitting to IK08 so will take a knock from a pallet on a fork-lift
• Light output is diffused to provide a low glare solution
• More efficient than LED tubes which are sometimes stolen
• Tested and proven light output without depreciation over time
• Long rated LED life and warranty
• Low power consumption and running costs
• Allows the fitting to be controlled by PIR, Microwave or photocell sensors to provide additional energy savings
• Suitable for wet or dusty environments indoors or outdoors